Radiator size?

[jason_l]

Hi All,

Just a quick one really if somebody has 5 minutes to help me out  ???

Im currently looking at radiator options and looks like now im not running a front mounted rad that i may be goiong back to the mini radiator. If anybody has five minutes can they go and measure the standard mini radiator. I don't have one to hand now that most of my bits have been sold.  : Also rough size of inlet/oulet pipes would also be great  ;D

Currently looking at a Aluminium uprated version but i believe its the same size as the original. Depth is not really an issue its the height and width that important.

Many thanks if anyone can help,

Jason

 

[iank]

http://www.aaronradiator.co.uk/products ... -1467.html

That has the core measurements (so doesn't include the tanks top and bottom)

http://www.car-radiators.org.uk/ also has lots of diagrams if you're looking to use a mainstream manufacturer one.

(VW302 from an early Polo is a very cheap way to get a small good alloy rad)

 

[esdebe]

Inlet / outlet pipes are 1 inch I believe so 25mm

 

[jason_l]

http://www.aaronradiator.co.uk/products ... -1467.html

That has the core measurements (so doesn't include the tanks top and bottom)

http://www.car-radiators.org.uk/ also has lots of diagrams if you're looking to use a mainstream manufacturer one.

(VW302 from an early Polo is a very cheap way to get a small good alloy rad)

Thanks Ian,

Looks like the Mini rad is perfect size, and i mean PERFECT!!!!!! Its 280 wide and the gap its going into is 300mm wide and 360mm Tall. Means the radiator will poke out the top ever so slightly but thats not a problem  ;D

25mm pipe conections ain't bad either, i believe the standard Toyota one is 26 or 28mm so pretty close match  ;D

Jason