Wheel bearings

mibazza

New member
Hi all, I'm servicing my Chinese XYKD-150 buggy and I have a loose wheel bearing I want to replace. Does anyone know how to get it out? I've tried a 50mm socket on the outer race and hit it with a lump hammer and nothing happens.
2d55306bed671168fad36c1410acbb75.jpg
6a2a4863b9f0abdc9d739c9e75778240.jpg


Sent from my SM-G955F using Tapatalk
 

Phaeton

Moderator
Staff member
Never seen these specific hubs & no experience with Chinese buggies, but the usual way is the centre (with the spline) has to be pushed out first, then once you've done that you'll find a circlip to remove, then the outer bearing will push (thump) out.

Have a look at this page Click Here then scroll down & enlarge Removal & Installation that should be the general principle
 
Top