MuddyBuggies The Buggy Owners Forum

ah Danny not good mate, i know what you mean with the plenty of other jobs though!!

Thanks Danny, its all tacked together at the moment and its a tight fit but should be ok, need to tack the mounting flange on the backboc properly but need to remove a couple of mounting tabs on the rear cage first (and then relocate the tabs so I can put the reverse and fog lights back on) I should...

Been busy again, finally got the driveshafts measured up - http://www.chaosmotorsport.com/media/rokgallery/b/bbfc980b-d0a5-4736-84ee-459e83bc739c/5b0ff8be-b704-49fa-9c2f-378827fa8c82.jpg here they are off to have the centre tubes cut to length and fitted ready for welding. Got the lower part of the ...

Would love to Alan - target set

Looking good Danny - Merry Christmas mate - hope you had a good one!!

I'm going to have a crack at my exhaust over the next few days hopefully it will looks as cool as yours!!

Looking great this, and welcome to the forum! interested to see how this ends up should be a lot of fun, my next build is using the same ford concept car as a ideas starting point (though its firmly shelved at the moment) As for Farcebook and Titter totally agree with Alan, both are just a festering...

Like Wagon said - video needed Danny!! - Looking awesome as usual though I have to say thats very neat and organised in that shed!!!!!!

ha ha ha ha yeah, good point

Another quick update guys got the fans mounted up, fitted like a glove!! needed to move the oil cooler about a bit but new location should be fine and due to the oil cooler move the external oil filter mount needed to move, here are a few pics: Firstly the rad fans and ally mount plate: http://www.c...

Hey Wagon, cheers mate - I know what you mean about holdups, ive had to go back to the drawing board for the driveshafts not for the long side but for the short side!! I have a question for you too, its about the DBW pedal - picture below http://www.chaosmotorsport.com/media/rokgallery/1/1d5fa1c2-11...

Cheers Alan, got to work on the final fit of the rad stuff but almost there now

Hi Guys, a bit of an update for you, finally got the next batch of laser cutting done, 8mm 304 stainless parts for the exhaust (manifold flange, and 6 3 bolt flanges to put the system together), 3mm steel for the rad /intercooler mount and the oil cooler mount, 8mm steel for the front hubs, and 3mm ...

Hi Wagon, yeah I did the 3d printing myself I bought a cheap chinese 3d printer ages ago and have upgraded and customised it so much that it does a half decent print now ;D As for the name i dropped the ultralite thing ages ago as it was far from it before let alone now!! - maybe I should just calle...

so little bit of an update - I have got the alloys sorted for the buggy!! due to the increased size of the disk and caliper and moving from 4 stud to 5 stud I had to change the wheels from the 15" Ultralite D1's to an 18" rim, in the end I got some replica Audi rims in need of TLC!! When I...

That pin out seems to be missing the rx/tx comms link line - or its going via one of the other lines somehow