Looking for another engine to replace mine

[Danny]

Hello chaps,

I am looking for a fast road engine 1330cc or 1380 would be ideal.

I am also interested in using a turbo lump if one can be found

cheers

Danny

 

[iank]

There's a turbo head carbs manifold etc over on locostbuilders at the moment. Also a block, but without pistons.
http://www.muddybuggies.com/phpBB2/viewtopic.php?t=288

 

[wurzell]

(See my other post!!)

Email me with your requirements......... 8)

 

[Phaeton]

http://www.theminiforum.co.uk/forums/in ... opic=58362

Just read your other post on the other forum about 1380, I've a half built one that I could finish off for you, depending how dep your pockets are.

Alan...

 

[Danny]

lol

what sort of money were you after alan?

Cheers

Danny

 

[Danny]

Hello,

When you say half built alan what has been done to it?

has it been rebuilt ie piston rings ect?

Cheers

Danny

 

[Phaeton]

Brand new pistons, freshly bored & honed, crank has been treated & ground back to standard, will have new big ends, mains & thrust washers. The head's been ported, got 35 & 29mm valves (I think) all lapped in with doubles springs.

I was going to fit a SW5-07 with a duplex vernier drive with new followers. I'll finish building it for you. Should push out 100+ BHP.

Alan...