Had what I thought was a good idea, take off the mechanical fan, replace this with a low profile electric fan mounted on the inside pulling air into the engine bay. I could then remove my external electric fan which would give me enough room mount another extinguisher as a petrol tank. I had hoped that by removing the mechanical fan & setting the electric fan into the shroud it would all line up again.
Overview of cooling
Close-up of fan mounted
However I had to extend the bottom bracket then cut & shut the top bracket. The bottom hose will just about stretch but the top one is nowhere near.
Bottom hose
Top hose
This has now virtually put the radiator put the radiator back where the external electric fan was gaining me a big fat ZERO!! The second tank will still not fit.
Rad to Mudguard
Extinguisher in space or not as the case maybe
So has anybody got a plan B
Alan...
Overview of cooling
Close-up of fan mounted
However I had to extend the bottom bracket then cut & shut the top bracket. The bottom hose will just about stretch but the top one is nowhere near.
Bottom hose
Top hose
This has now virtually put the radiator put the radiator back where the external electric fan was gaining me a big fat ZERO!! The second tank will still not fit.
Rad to Mudguard
Extinguisher in space or not as the case maybe
So has anybody got a plan B
Alan...