Phaeton":3lx3j7fr said:Yes it would have had a reverse light switch, it's up the front though not on the gearbox. Do you know which way around your gearstick housing is? Does it look like this, or is it still original?
I personally hate having them in a manual switch because with all the will in the world you will at some point leave them switched on, I also feel the modification gives you a better gear change feel & reverse is more positive as it is the way it was designed to work. If you want to do the mod let me know & I'll explain more, it was in Bumbles build diary but with photofuckupbucket deleting all the images it makes no sense.
Phaeton":3hcmpn3r said:You take off the bottom of the housing, 4x screws, knock out the roll pins on the rods, spin the housing, rods back in, roll pins back in, you may have to spin the plate on the bottom can't remember now. But once you have done that the reversing switch hole is back where it ought to be , so you can insert a switch & it will work when selecting reverse. Down side you will have to make new mountings, it really should have been designed this way from the beginning.