Latest activity

Danny? It was WullieAsbo who was asking?

No probs mate will wait to hear from Danny

If he's not I maybe tempted depending on price

Hi mate are you still looking?

Just a thought if you are at this stage I would spin the gearchange housing round to get the correct use of the reverse lights.

I did start looking at the build threads so I will carry on where I left off and get caught up now I am getting somewhere with mine...

Hi Ross There is a shed load of info on this forum, you need to look at the last 4 Freestyle buggy builds, been through IVA. All the...

I was thinking can you use braided as I thought that would be better and/or easier!? I will have a look at them on eBay Do you have to...

I went braided hose end to end, originally I used the standard copper pipe end to end with custom braided lines to the hubs but when I...

Coming along well and totally agree its good to see a Freestyle in build again!! - And I totally understand what you mean about a lack...

Good point Alan, I welded a piece of 3mm plate to the side to stop flex as you recommended then they are all over the handbrake and...

This

a little more progress although ive decided to replace all four shocks and all the ball joints so will be waiting for bits for the next...

Still only a few degrees but found some motivation to get some jobs done 😃 Got the manifold back on, dip stick bolted back on. The...

Just be careful of those brackets, you may have to add some beef to them if they start to flex which the originals ones did, you need...